Selecting A Source - Meridian DSP420 User Manual

Selecting a source

When not playing, the digital loudspeakers should be left in the
standby state. This ensures that the components of the
loudspeakers operate at maximum efficiency from the moment
you start.
To select a source
Press the appropriate source key on the remote; eg DVD.
This will bring the digital loudspeakers out of standby. If there is
a signal to the speakers the green indicator on each speaker will
be illuminated.
To switch to standby
Press Off on the remote.
The loudspeakers will switch to standby and the green indicator
on each speaker will go off.
16