M-Audio Session KeyStudio User Manual page 20

Problem 10: My synthesizer always recalls the sound next to the program number that I have sent to it from the KeyStudio. For
example, if I send a program change with the number 40 (Violin), my software loads sound number 41 (Viola).
Solution 10: Some General MIDI modules count their sound patches from 1 – 128 instead of 0-127. Both methods are common. As a
result, and depending on the sound module you use, there may be an offset of +/-1 between the sent program change number and the
recalled sound patch.
Problem 11: Synth Patches and MultiFX Presets do not load.
Solution 11: It is likely that you moved the Factory and/or User Content Folders. If you moved the Factory Content Folder, you can point
Session to it by choosing Locate Factory Content Folder from the Options Menu. If you moved the User Content Folder, you can point
Session to it by choosing Set User Content Folder from the Options Menu.
Problem 12: After adding more sample content, the new content does not display in the Track Browsers.
Solution 12: When manually adding new content to Session (copying new files into Session's Content Folders), you must re-scan the
Content Library by choosing Re-Scan Content Categories from the Category Manager.
Problem 13: The Composition sounds distorted.
Solution 13: If your Composition sounds distorted, you may need to lower the overall volume of the Composition by adjusting the Master
Volume Control, located at the top right of the Session window. If the level is loud enough to cause distortion, you will see two red dots at
the far right end of the Master Volume Control.
Problem 14: The Session software operates very slowly, and is very system-resource intensive.
Solution 14: This problem may be solved by downloading and installing a more current driver from your specific graphics card
manufacturer's website.
Session KeyStudio User Guide
|
20