Using Keystudio With Garageband - M-Audio Session KeyStudio Quick Start Manual

Mac OS X: Getting Started
Connecting the KeyStudio Keyboard
No additional drivers or hardware* need to be installed to use the KeyStudio USB
keyboard on your Macintosh computer. Simply:
1. Close any open applications on your computer.
2. Connect the provided USB cable between the KeyStudio keyboard and your
Mac OS X computer.
3. Switch the keyboard on.
*M-Audio Micro circumvents potential high-latency monitoring issues on Windows
PCs. The built-in audio hardware on Apple computers enables low latency
monitoring without the need for additional hardware. If you are using a Mac, you
should simply use your computer's built-in audio inputs and outputs.

Using KeyStudio with GarageBand

1. Be sure the KeyStudio keyboard is connected to your Mac OS X computer via
the provided USB cable (See Connecting the KeyStudio Keyboard.)
2. Launch GarageBand.
3. Create a Software Instrument track by clicking Track > New Track > Software
Instrument > Create, or select a pre-existing Software Instrument track.
Session KeyStudio Quick Start Guide
|
11
English