Advertisement
Configuring the ProjectMix I/O for the use with your
DAW software
The ProjectMix I/O natively supports a series of Digital Audio Workstation
(DAW) software titles that can utilize the Mackie Control or HUI protocol.
The ProjectMix I/O needs to be started into a specific mode to support these
applications. This is done by holding down one of the following buttons while
powering the unit on:
1.
Pro Tools mode: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aux 1
2.
Cubase mode: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aux 2
3.
Logic mode: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aux 3
4.
Sonar mode: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aux 4
5.
Live mode: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aux 5
6.
Digital Performer mode: . . . . . . . . . . . . . . . . . . . . . . . . Pan
Keep this button held down after powering the ProjectMix I/O on until you see a
confirmation message on the LCD screen.
Depending on the software you use, you may need to change additional settings
within your DAW to establish communication with the ProjectMix I/O. Generally,
you need to select or create a Mackie Control or HUI device and set the MIDI
Input (receive) and MIDI Output (transmit) ports to "ProjectMix Control Surface
MIDI." Detailed setup steps for every natively supported DAW can be found in
the User Guide on the included FireWire Driver CD.
ProjectMix I/O Quick Start Guide
Additional Information and Support
We recommend checking the M-Audio website regularly for driver updates and
additional information. The web address for the site is www.m-audio.com. You'll
find links to drivers, news stories, FAQs, additional products, and tech support.
3
English
051210_ProjMix_QSG_EN01
Advertisement
