To Display Your Lcd Tv Using A Wall Bracket - Toshiba 19EL833G Owner's Manual

If you decide to wall mount your LCD TV, always use a wall bracket appropriate for the size and weight of
the LCD TV:
(1) Caution: Two people are required for installation.
(2) Unplug and remove any cables and/or other component connectors from the rear of the TV.
(3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the
wall bracket.
(4) IMPORTANT: Always use the screws supplied or recommended by the wall mount manufacturer.
(5) After attaching the appropriate bracket(s) to the wall and the back of the TV, remove the pedestal stand
from the TV as described below.
Removing the pedestal stand
(1) Carefully lay the front of the TV face down on a fl at, cushioned surface such as a quilt or blanket. Leave
the stand protruding over the edge of the surface.
Note: Extreme care should always be taken when removing the pedestal stand to avoid damage to
the LCD panel.
(2) Remove the two screws on the stand. This will allow removal of the pedestal stand.
(3) Once you have removed two screws holding the pedestal stand in place, remove the pedestal stand from
the TV by sliding the pedestal stand away from the TV.
*For 19EL833G model
A01_MB60_[GB]_(IB_INTERNET)_DVB-TC_(CT90326)_1007xxxx_5018xxxx_v4.indd 7 A01_MB60_[GB]_(IB_INTERNET)_DVB-TC_(CT90326)_1007xxxx_5018xxxx_v4.indd 7

To display your LCD TV using a wall bracket

English - 7 -
* For 22EL833G model
30.03.2011 11:41:42 30.03.2011 11:41:42