Toshiba 19AV703 Owner's Manual page 8

For 32/40LV70**
Aerial cables: - - - - - - - - - - - - - - - - - - -
Connect the aerial to the ANT socket on the rear
of the television.
If you use a decoder and/or media recorder, con-
nect through the decoder and/or media recorder
to the television.
SCART cables: - - - -- - - - - - - - - - - - - - -
Connect the video recorder IN/OUT or decoder
TV socket to the television. Connect the media
player SAT socket to the decoder MEDIA REC.
socket.
Before running Auto Tuning put your decoder
and media recorder to Standby.
The phono sockets alongside the COMPONENT
VIDEO INPUT sockets will accept L and R audio
signals.
The phono sockets alongside the VIDEO INPUT
socket will accept L and R audio signals. These
sockets are located on the side of the TV. (See
the next page.)
HDMI 1 INPUT
SOCKET
HDMI 2 INPUT
SOCKET
HDMI (High-Definition Multimedia Interface)
®
is for use with a DVD, decoder or electrical
equipment with digital audio and video output. It
is designed for best performance with 1080i high-
definition video signals but will also accept and
display 480i, 480p, 576i, 576p, 720p and 1080p.
HDMI1 also support VGA, SVGA, XGA, WXGA
and SXGA.
NOTE: Although this television is able to con-
nect to HDMI equipment it is possible that some
equipment may not operate correctly.
A wide variety of external equipment can
be connected to the back of the television,
therefore the relevant owners manuals for all
additional equipment must be referred to.
If the television automatically switches over to
monitor external equipment, return to normal
television by pressing the desired programme
position button. To recall external equipment,
press to select.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.