Channel Decode; Analogue Channel Fine Tune; Common Interface; Reset Default - Toshiba 19AV613D Owner's Manual

TUNING THE TELEVISION

Channel Decode

Channel Decode support the Canal+ (paid
television channel); however, the channel also
broadcast some un-encrypted programmes.
These programmes without encryption can be
viewed free of charge.
Select Channels from the SETUP menu.
Highlight Channel Decode and press ► or
to select.
Use ▲or ▼ to highlight the channel and
press to set.

Analogue Channel Fine Tune

When the reception is poor, you can use this
function to do the fine tuning.
In the SETUP menu press ▼ to highlight
Channels and press ► or
Press ▼ to highlight Analogue Channel
Fine Tune and press
Highlight and press
channel.
4
Use ◄ or ► to adjust the frequency. Press
◄ to decrease and ► to increase the
frequency.

Common Interface

This function enables you to watch some pay
services (encrypted services). When the module
is inserted into the CI slot, you can access the
module menu. To purchase a module and smart
card, contact your dealer. Common Interface
functions may not be possible depending upon
the country broadcasting circumstances.
Press MENU and use ◄ or ► to select
SETUP.
Press ▼ to highlight Common Interface
and press ► or
Press to select the CI card to view the
Module information.
to select.
to select.
to select the
.

Reset Default

Selecting Reset Default will reset all TV settings
to their original factory values, excludes Country,
Language OSD, and Channels.
In the SETUP menu press ▼ to highlight
Channels and press ► or
Select OK to confirm or select Cancel to
exit.

General controls

Selecting programme
positions
To select a programme position use the
numbered buttons on the remote control.
Programme positions can also be selected using
P P .
To display on-screen information i.e. programme
position, input mode or stereo/mono signal,
press . Press again to cancel.
Stereo and Bilingual
transmissions
If stereo or dual language broadcasts are
transmitted the word Stereo or Dual will appear
on the screen each time programme positions
are changed, disappearing after a few seconds. If
the broadcast is not in stereo the word Mono will
appear.
Stereo... Press to select Stereo or Mono.
Bilingual... Bilingual transmissions are rare. If
they are transmitted the word Dual will display.
Choose the required programme number and
if the word Dual appears press
Dual 1, Dual 2 or Mono.

Audio Description

Audio description is an additional narration
describing on-screen action, body language,
expressions and movements for people with
visual disabilities. Press AD button to switch the
audio description On or Off.
21
to select.
to select