Changing the Line Frequency
For optimum rejection of line noise, set the thermometer
for the local line frequency as follows:
1.
Press
or
until the display shows
2.
Press
to indicate that you want to change the
line setting.
3.
Press
or
as needed until the display shows
or
(50 Hz or 60 Hz).
4.
Press
to store the line setting in memory.
Measuring Temperatures
Connecting a Thermocouple
Thermocouples are color coded by type based on the
.
North American ANSI Color Code:
Type
J
K
T
E
1.
Plug a thermocouple into the input connector(s).
2.
Set the thermometer for the correct thermocouple
type.
To change the thermocouple type, see "Changing
Setup Options."
53 & 54 Series II
Measuring Temperatures
Color
Type
Black
R
Yellow
S
Blue
N
Purple
Color
Green
Green
Orange
13