Table of Contents
Advertisement
Enabling the GSM Radio
By default, the GSM radio is not enabled after a hard reset. Verify the status of the radio in the Dolphin
Wireless Manager.
Tap Start > Settings > Connections > Dolphin Wireless Manager
If the Phone is set to OFF, tap the Phone rectangle and the GSM radio enables.
Voice Communication
You can use the Dolphin terminal as a phone over the GSM radio.
Audio Modes
The front panel of the 9700 contains both a speaker and a microphone that you can use to send and
receive audio signals over the GSM network, see
There are two audio modes:
Handset Mode:
The front speaker is used for receiving handset voice calls and the front panel
microphone provides audio input to the terminal.
Hands-Free Mode: Hands-free mode is when you use the rear speaker as a speakerphone. To switch to
speakerphone, tap on the speaker button in the Dialer window.
9 - 4
Front Panel: 9700
on page
.
3-4.
Advertisement
Table of Contents
