New Balance 8.0e Owner's Manual page 9

STEP 7 – Computer Assembly
a) Remove the Phillips Screws from the back of the Computer.
b) Snap together Connectors for Computer, tucking the Wires inside the Stationary
Bar Assembly.
The Book Holder can be attached to the Computer at any time.
c) Attach the Computer using the four Phillips Screws you removed in Step 6a into
the back of the Computer. Tighten with the Screwdriver provided.
d) Remove Battery Door on the back of the Computer.
Insert four "C" Batteries (included) in numbered order and replace Battery Door.
book holder
7a
stationary bar
assembly
STEP 8 –
Water Bottle Holder Assembly
Remove the two M4 x 12mm Machine
Screws from Vertical Column Tube. Line
up Water Bottle Holder and attach to
the Vertical Column Tube by re-inserting
Screws and tightening them with the
Screwdriver provided.
8
remove
screw
water
bottle
holder
remove
screw
8
Front View
computer
connectors
vertical
column
tube
Back View
four "C" batteries
4 3
1 2
7b
stationary bar
assembly
Step 9 –
AC Adapter
Insert AC Adapter
into rear of unit,
then plug into wall.
AC
Adapter
Assembly is now complete.
IMPORTANT:
Please read pages 9-10 before beginning
your workout for important instructions
on how to use your New Balance
8.0e Elliptical Trainer.
7c
battery
door
back of
computer
9