ActionTec ScreenBeam SBWD100A User Manual page 6

HDMI Port
The HDMI port is used to connect an HDMI cable from the HDTV monitor
to the Receiver.
Power Port
The Power port is used to connect the Receiver's Power cord.
USB Port
The USB port is used for software upgrades via a USB flash drive. Refer to
Chapter 4, "Updating the ScreenBeam Software, " for more information.
ScreenBeam USB Transmitter
The USB Transmitter has a single USB connection, used to connect it to a USB
port on a Windows 7/8 laptop/PC that is not running Miracast or WiDi. To use
ScreenBeam in this manner, you must install the ScreenBeam software on the
computer (see Chapter 2 of this manual).
Introduction
4