Usb 2.0 Port; Connecting A Universal Serial Bus (Usb) Mouse - Sony VAIO PCG-FR215M User Manual

Connecting peripheral devices

Connecting a Universal Serial Bus (USB) mouse

You can connect a USB device (e.g. mouse, floppy disk drive, keyboard, printer, ...) to your computer.
Before connecting or disconnecting a USB peripheral, you do not need to shut down the computer.
You may need to install software (device drivers) supplied with your USB device before using the USB device.
There are 3 2 USB 2.0 ports at the left of your notebook and 1 at the back.
To connect a USB mouse, proceed as follows:
1 Select the USB port (1) of your choice.
2 Plug the USB mouse cable (2) into the USB connector.
You can use your USB mouse (3).
You do not need to shut down the computer before connecting or
disconnecting a USB peripheral.
The USB mouse software driver is preinstalled on your notebook, therefore,
you only need to plug the USB mouse into the USB connector and you can
start working.
You may need to install software (device drivers) supplied with your USB
device before using the USB device.
n N
72