Command List; Operation Commands - Mitsubishi DLP XD550U Control Manual

4. Command list

4.1 Operation commands

The operation commands are used for the basic operation setting of this projector. They may not be executed
while the signals are changed. The operation commands have no data codes. (When the commands for input
select are sent while the splash screen is being displayed,the splash screen is only canceled.)
ITEM
POWER ON
POWER OFF
INPUT COMPUTER 1 _r1
INPUT COMPUTER 2 _r2
INPUT VIDEO
INPUT S-VIDEO
INPUT HDMI
INPUT PC Less Presentation
INPUT USB DISPLAY
INPUT LAN DISPLAY
[Example] When setting the input signal to COMPUTER 1. (Values enclosed in quotation marks are ASCII
codes.):
Command sent from the PC, etc.
'30''30''5F''72''31''0D'
00_r1
4.2 Reading command diagram
The projectors operating status, such as POWER-ON/OFF a nd the currently selected input terminal, etc. can be
monitored.
ITEM
POWER ON
POWER OFF
INPUT COMPUTER 1
INPUT COMPUTER 2
INPUT VIDEO
INPUT S-VIDEO
INPUT HDMI
INPUT PC LESS PRESENTATION
INPUT USB DISPLAY
INPUT LAN DISPLAY
POWER ON/OFF IMPOSSIBLE
POWER ON/OFF POSSIBLE
NO SIGNAL SUPPLIED
SIGNAL SUPPLIED
Use the following commands to obtain the values of the items in the INFORMATION menu.
ITEM
LAMP TIME (LOW)
RESOLUTION
"hhhh" and "mm" represent hours and minutes respectively.
"HHHH" and "VVVV" represent the horizontal and vertical resolutions respectively.
Function
Character ASCII
! 21h
" 22h
5Fh 72h 31h
5Fh 72h 32h
_v1 5Fh 76h 31h
_v2 5Fh 76h 32h
_d1 5Fh 64h 31h
_s1 5Fh 73h 31h
_s2 5Fh 73h 32h
_n1 5Fh 6eh 31h
'30''30''5F''72''31''0D'
00_r1
Character
Function
vP
vP
vl
vl
vl
vl
vl
vl
vl
vl
vPK
vPK
vSM
vSM
Function
Character
vLE 76h 4Ch 45h
vRESO 76h 52h 45h 53h 4F
This command is invalid for 1 minute after the power is turned off.
This command is invalid for 1 minute after the power is turned on.
This command will not be executed in Stand-by mode or when the MUTE is executed.
This command will not be executed in Stand-by mode or when the MUTE is executed.
This command will not be executed in Stand-by mode or when the MUTE is executed.
This command will not be executed in Stand-by mode or when the MUTE is executed.
This command will not be executed in Stand-by mode or when the MUTE is executed.
This command will not be executed in Stand-by mode or when the MUTE is executed.
This command will not be executed in Stand-by mode or when the MUTE is executed.
This command will not be executed in Stand-by mode or when the MUTE is executed.
Status code returned
from the projector
Data (Receive) Function
1 76h 50h
0 76h 50h
r1 76h 49h
r2 76h 49h
v1 76h 49h
v2 76h 49h
d1 76h 49h
s1 76h 49h
s2 76h 49h
n1 76h 49h
0 76h 50h 4Bh
1 76h 50h 4Bh
0 76h 53h 4Dh
1 76h 53h 4Dh
ASCII
5
Note
Description
Command for setting the input signal to
COMPUTER 1
Command receipt confirmation
(Command echo back)
A S C I I
Data (Receive)
31h
30h
72h 31h
72h 32h
76h 31h
76h 32h
64h 31h
73h 31h
73h 32h
6eh 31h
30h
31h
30h
31h
Data (Receive)
hhhhmm
HHHHxVVVV