Table of Contents
Advertisement
1
1
1
1 Put the coloured roller of the ink sheet to the ink cassette. AB
1
2 Put the thin stick of white roller to the ink cassette. C
2
2
2
2
3
3
3 Put the thick stick of white roller to the ink cassette. DE
3
3
On the D position, turn the roller and set the notch of the roller side to the hole of the
cassette.
The roller can be installed when the notch is put through the hole.
2 2 2 2 2 INSTALLING THE INK CASSETTE
1 Eliminate any slack of the ink sheet.
1
1
1
1
Hold the coloured roller and turn the white roller.
2
2 Insert the ink cassette with the ink sheet into its compartment.
2
2
2
Insert the ink cassette with the knob side toward you until it is locked into place. When
taking the ink cassette out of the compartment, press the ink cassette locking holder to
release the lock. Refer to page 5.
2 2 2 2 2 INSERT THE PRINTING UNIT
1 Push the printing unit until it is locked into place.
1
1
1
1
2 After plugging the power cord, press POWER button on the front
2
2
2
2
panel.
3
3
3 Press MEMORY button about 1 second with holding MONITOR
3
3
button on the front panel.
The print paper is automatically cut after feeding about 10 cm (4 inches).
4
4
4 Repeat the above step 3
4
4
Fingerprints and dust can be removed by feeding the print paper. The printing unit is
initialized.
Make sure to press MONITOR button first for operating 3 and 4.
•
Pressing MEMORY button first operates to memorize the images. When
exchanging the printing paper or ink cassette during using the unit, the
recorded images may be erased by pressing MEMORY button first.
•
Do not feed the print paper more than 2 times. Doing so will not allow the
number of prints indicated on page 14 to be printed.
The installation of print paper and ink cassette is completed.
3
3
3 once or twice.
3
NOTE
AB
AB
AB
AB
E
C
C
C
C
B
DE
DE
DE
DE
White roller
C
A
Colored roller
E
D
hole
notch
17
Advertisement
Table of Contents
