Mitsubishi Electric Laservue L75-A96 Basic Owner's Manual page 18

16
2. TV Connections
DV I Video Device
Examples: Computer or Older A/V Device
Note:
• This connection can carry high-definition video
signals.
• The HDMI connection supports copy protection
(HDCP).
Connect a DVI device (digital only) to one of the TV's
HDMI input jacks.
Required:
RCA-type analog audio cables
DVI-to-HDMI cable or DVI/HDMI adapter and HDMI
cable
Some devices require a connection using an analog
output first in order to view on-screen menus and to
select DVI as the output. Please review your equipment
instructions for DVI connectivity and compatibility.
Ante nna or Cable TV Service
Connect the incoming cable to the TV's ANT input.
Reception over direct cable (no box) is limited to non-
scrambled analog and digital channels.
Cable TV
service
UHF/VHF
antenna
or
or
Not recommended.
Older
Other connection
cable
types provide better
box IN OUT
quality audio and
video.
For assistance call 1(877) 675-2224
Comp osite Video Device
VCR or other device with composite video
output
Note: This connection does not support high-defini-
Required:
INPUT 1 INPUT 1 INPUT 2 INPUT 2
TV panel
Digital DVI
device
DVI-to-HDMI
cable
DVI OUT
R
AUDIO
L
Audio
cables
tion video signals.
Composite video cable (usually yellow)
RCA-type analog audio cables
VCR or other device with
composite video output
AUDIO OUT
COMPOSITE
VIDEO OUT
L R
Audio
cables
Composite
video cable
TV
panel
INPUT 1 INPUT 1 INPUT 2 INPUT 2
TV panel
INPUT 1 INPUT 1 INPUT 2 INPUT 2