Input And Output Jacks; Connection Diagrams - Mitsubishi Electric DLP 742 Series Basic Owner's Manual

14
2. TV Connections

Input and Output Jacks

Additional jacks
offered on the
842 series.
HDMI
1 2
HDMI
(page 14, page 17)
Inputs are HDMI
HDCP compliant.
HDMI-4 offered
on the 842 series.

Connection Diagrams

HDMI Device
Examples: HDTV Cable Box, Satellite Receiver,
or DVD/Blu-ray Player
Required: HDMI cable.
Connect an HDMI cable from the TV to the device's
HDMI output. HDMI-connectable devices provide
video and audio through a single cable.
Mitsubishi recommends using high-speed HDMI cables
to connect newer devices incorporating HDMI technol-
ogy. See "HDMI Cable Categories" on the previous page
for more on HDMI cable types.
Note:
• This connection carries high-definition video,
3D video, and Dolby Digital 5.1 audio signals.
• This connection supports copy protection
(HDCP).
For assistance call 1(800) 332-2119
AUDIO/SURROUND
R -OUTPUT-
CENTER
INPUT
3 4
USB/USB-P
• The left USB port can
accept a wireless network
adapter. See page 19.
• 842 Series. The right
USB port can power a TV
accessory such as a wire-
less subwoofer.
AUDIO/SURROUND OUTPUT
CENTER INPUT
SUBWOOFER OUTPUT
See the Supplemental Owner's Guide at
www.mitsubishi-tv.com for use of these jacks.
ANT
Coaxial antenna
input
(page 16)
L
SUB WOOFER
OUTPUT
3D
ANT
GLASSES
USB-P LAN
EMITTER
DVI/PC
INPUT
Audio
input
(page 16)
LAN
(Ethernet, port
page 18)
HDMI HDMI
1 1 2 2
Any device with
HDMI output
Incoming from
cable service or
satellite dish
3D DIGITAL
GLASSES AUDIO
EMITTER OUTPUT
(page 21) (page 17)
DIGITAL
AUDIO
OUTPUT
L
R
L/R
L Calibration
Analog stereo
Microphone
audio inputs
(optional)
Input
(842 series,
page 25)
AUDIO/SURROUND
R -OUTPUT- L
CENTER SUB WOOFER
INPUT OUTPUT
3D
ANT
GLASSES
USB-P LAN EMITTER
3 3 4 4
TV jack panel
HDMI
cable
CABLE IN or
SATELLITE IN
Y
Composite
video input
(page 16)
Y Pb Pr
Component
video input
(page 15)
DIGITAL
AUDIO
OUTPUT
L
R