Viewing Computer Images - Mitsubishi Electric DLP HC7800D User Manual

Hide thumbs Also See for DLP HC7800D:
Table of Contents

Advertisement

Viewing computer images

A. Connecting the projector to a computer
Preparation:
• Make sure that the power of the projector and that of the computer are turned off.
• When connecting the projector to a desktop computer, disconnect the computer cables that are connected to the
monitor.
To COMPUTER/
COMPONENT VIDEO IN
terminal
1
• Turn on the power of the projector before that of the computer.
• Additional devices, such as a conversion connector and an analog RGB output adapter, are required depending
on the type of the computer to be connected.
• Use of a long cable may decrease the quality of projected images.
• Also read the instruction manual of the equipment to be connected.
• Images may not be projected correctly, depending on the type of the computer connected.
• Contact your dealer for details of connection.
About DDC
The COMPUTER/COMPONENT VIDEO IN terminal of this projector complies with the DDC1/2B standard and the
HDMI 1 and HDMI 2 terminals comply with the DDC2B standard. When a computer supporting this standard is
connected to this terminal, the computer will automatically load the information from this projector and prepare for
output of appropriate images.
• After connecting a computer supporting this standard to this terminal, plug the power cord of the projector in the
wall outlet first, and then boot up the computer.
B. Plugging the power cord
Plug the power cord in the same way as described in "Viewing video images." (See page 17.)
To monitor port
2
Computer cable
1. Connect one end of the supplied computer cable to the
COMPUTER/COMPONENT VIDEO IN terminal of the
projector.
2. Connect the other end of the computer cable to the
monitor port of the computer.
• Additional devices, such as a conversion connector and an
analog RGB output adapter, are required depending on the
type of the computer to be connected.
• When viewing images supplied from an analog-connected
computer, press the COMPUTER button on the remote
control.
EN-22

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hc7800dw

Table of Contents