Viewing Computer Images - Mitsubishi Electric HC100 User Manual

Viewing computer images

A. Connecting the projector to a computer
Preparation:
• Make sure that the power of the projector and that of the computer are turned off.
• When connecting the projector to a desktop computer, disconnect the RGB cables that are connected to the
monitor.
COMPUTER IN/
COMPONENT VIDEO IN
1
2
COMPONENT VIDEO IN
DVI-D (HDCP) IN
1
2
COMPONENT VIDEO IN
• This projector uses stereo mini plug for its audio input. Check the type of the audio output terminal of the
connected computer and prepare a proper cable for connection. Some computers don't have the audio output
terminal.
• Turn on the power of the projector before that of the computer.
• Additional devices, such as a conversion connector and an analog RGB output adapter, are required depending on
the type of the computer to be connected.
• Use of a long cable may decrease the quality of projected images.
• Also read the instruction manual of the equipment to be connected.
• Images may not be projected correctly, depending on the type of the connected computer.
• Contact your dealer for details of connection.
B. Plugging the power cord
Plug the power cord in the same way as in the case of "Viewing video images." (See Page 14.)
EN-18
For analog connection:
1. Connect one end of the supplied RGB cable to the COM-
PUTER IN/COMPONENT VIDEO IN terminal of the
projector.
2. Connect the other end of the RGB cable to the monitor
to monitor port
port of the computer.
• Additional devices, such as a conversion connector and
RGB cable
an analog RGB output adapter, are required depending
on the type of the computer to be connected.
• When viewing images supplied from an analog-connected
computer, press the COMPUTER button on the remote
control.
• This projector does not support 3-line signals (SYNC-
ON-GREEN signals).
For digital connection:
1. Connect one end of a commercially available DVI cable to
the DVI-D terminal of the projector.
2. Connect the other end of the DVI cable to the DVI termi-
nal of the computer.
• Additional devices, such as a conversion connector and
to DVI
an analog RGB output adapter, are required depending
on the type of the computer to be connected.
DVI cable
• When viewing images supplied from a digital-connected
computer, press the DVI-D(HDCP) button on the remote
control.
http://www.pureglare.com.au