Page 2
Parts Base Shape Sorter 3 Shape Sorter Roller Ball Part not shown: Label Sheet Handle Smooth Side Up • Position the shape sorter with the smooth outer edge facing up. • At an angle, fit a peg on one side of the shape sorter into the hole in the base.
Page 3
• “Snap” the hubs to the back of the base, as shown. • At an angle, insert a peg on the roller ball into the socket in the front of the handle. Then, push to “snap” the other peg on the roller ball into the other socket in the handle.
• Wipe this toy with a clean cloth dampened with a mild soap and water solution. Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. 2007 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Page 5
Proper label application will help to keep the labels looking their best! • For best results, do not attempt to apply a label more than once. Decoration • Make sure the areas where the labels will be applied are clean and dry. Wipe this product with a clean, soft, dry cloth to remove any dust or oils.
Page 6
Walker-to-Wagon PRESS PRESS PRESS • Press the buttons on the sides of the handle and lift to remove the base. PRESS • Press the buttons on the side of the handle and “snap” the handle into the hubs. Easy Conversion Wagon-to-Walker PRESS PRESS...