Meade StarNavigator Series Instruction Manual page 6

ASSEMBLY VIEW: STARNAVIGATOR REFRACTING TELESCOPES
E
Fig. 1b (Inset): (E) Altitude
setting circle; (F) Altitude lock.
(not visible)
1. Focus Knob
2. Eyepiece Holder
12
3. 90° Diagonal Prism
( refractors only )
4. Eyepiece Holder
13
Thumbscrew
5. Eyepiece
6. Focus Lock Knob 14
7. Red Dot Viewfinder
8. Red Dot Viewfinder
15
Alignment Screw
9. Compass/Bubble Level
10. Altitude Setting Circle
16
and Lock
11. Dew Shield
12. Dust Cap
24
13. Optical Tube
14. Cradle Ring Lock Knob
15. Cradle Ring
23
16. Mounting Arm and Shaft
17. Computer Control Panel
18. Accessory Tray
Attachment Bolts
22
19. Accessory Tray
20. Inner Support Struts
21. Tripod Leg Locks
22. Tripod Legs
23. Tripod Base
24. Azimuth Setting Circle
25. Battery Compartment
26. Base Lock Knob
Features of the
StarNavigator Series
telescopes are virtually
identical. Certain features of
your telescope may look
different than, or be
positioned slightly different
than the one pictured here,
but the functionality of the
features is the same.
Fig. 1: StarNavigator Series Refracting Telescope.
F
9
Fig. 1d (Inset):
Compass/bubble level.
10
11
26
20
21
18
Looking at or near the Sun will cause irreversible damage to your eye. Do not point this telescope at or near the Sun.
Do not look through the telescope as it is moving.
5
8
4
6
2
3
Fig. 1e (Inset): Focus assembly and viewfinder.
(opposite
side)
7
25
17
19
Fig. 1c (Inset): Computer control panel. (A)
Handbox port; (B) Power indicator light, (C)
switch; (D) Auxiliary port.
ON
6
8
A B D
C
7
6
5
4
3
2
1