Fisher-Price POWER WHEELS R9543 Owner's Manual & Assembly Instructions page 13

Hood
16
FRONT VIEW
• Fit the long tabs on the hood into the slots in the front end of
the vehicle.
• Pull the hood forward and lower.
Note: The hood is held down by magnets. Simply lift to open the
hood. Do not use around items that are sensitive to or affected
by magnetic fields.
Spoiler
17
• Fit the spoiler onto the rear deck.
• Insert four #8 x ¾ " screws into the holes and tighten.
R9543pr-0920
ASSEMBLY
Rear Deck
Rear Deck
18
BACK VIEW
• Fit the tabs on the rear deck into the slots in the back end of
the vehicle.
Short Seat Belts
Seat
19
• Insert the fastener end of a short seat belt strap through the
slot near the outer edge of the seat. Make sure the side of the
seat belt with the fastener faces the outer edge of the seat.
• Pull the short seat belt strap completely through the slot until
the last T-loop at the opposite end of the belt catches against
the slot. You will pull one T-loop through the slot.
• Repeat this procedure to assemble the other short seat belt strap.
• Insert each fastener end of the long seat belt strap through
each slot in the center of the seat. Make sure the fasteners
face the outer edge of the seat.
• Pull each side of the long seat belt strap evenly through the
slots. Make sure to pull each T-loop through a slot.
Long Seat Belt
13