Watching Dvd And Digital Tv Images; For Better Sound - Sharp XG-V10WE Operation Manual

Watching DVD and Digital TV Images

Connecting to a DVD player, DTV* decoder and other component video
equipment using the 5 BNC Input
(sold separately)
3
1
Three BNC-RCA adaptors
(Sold separately)
*DTV is the umbrella term used to describe the new digital television system in the united states.

For Better Sound

Connecting to an amplifier and other audio components
Audio cable (sold separately)
e.g. Outputs for Inputs 4, 5
1 Connect each BNC connector of a component cable to the corresponding
BNC INPUT 2 terminals on the projector.
• BNC-RCA adaptors are needed for use with RCA type cables and sources.
2 Connect the other end of the cable to the corresponding terminals on a DVD
player or DTV decoder.
3 To use the built-in audio system, connect one end of an audio cable (sold
separately) to the AUDIO INPUT 2 terminal on the projector.
4 Connect the other end to the audio output terminal on the DVD player or DTV
decorder.
When connecting this projector to a DVD player or DTV decoder, select
"Component" for "Signal Type" on the GUI menu. (See page 45.)
Audio cable
4 To audio output terminals
2 To analog component
Component cable (sold separately)
CAUTION
• Always turn off the projector before connecting to audio components, in order
to protect both the projector and the components being connected.
• By using external audio components, the volume can be amplified for better sound.
• The AUDIO OUTPUT terminals allow you to output audio to audio components from the
selected AUDIO INPUT 1 to 5 terminals connected to audiovisual equipment.
To audio input terminals
output terminals
CAUTION
• Always turn off the projector before connecting to video
equipment, in order to protect both the projector and the
equipment being connected.
Amplifier
DTV decoder
or
DVD player
18