Honda 2008 Accord Navigation Manual page 123

Frequently Asked Questions
Problem
When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
The daytime map screen is dark like the night display mode,
and it is hard to see. Why?
Once I press the Display mode button
screen no longer automatically switches between day and
night display modes. Why is this?
How can I input my destination using map coordinates?
How do I change or remove my PIN?
I forget the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it?
CALL is not available on the Calculate route to screen.
Why?
122 Navigation System
Verify the following: The night-time dash brightness control is not set to
maximum, and Map Color in SETUP is set to Black for Night. See
Switching Display Mode Manually on page 98.
Verify the following: The Map Color in SETUP is set to White for Day.
See Switching Display Mode Manually on page 98.
, the navi This is normal. Once you press the Display mode button
manually controlling the display mode. Your manual display mode setting is
canceled the next time the vehicle is started.
The navigation system was not designed for this. However, you can view
the coordinates of an address by pushing in on the Interface Dial, selecting
Show Icon on Map, and moving the Interface Dial left to select Current
Location. See Map Screen Legend on page 49.
Go to "Personal Information" in the SETUP screen (Other), and select PIN
Number. Select User 1 or User 2 and enter your existing PIN. You then
have the choice to change or remove the PIN. See page 82.
PINs are optional. See information regarding PINs on page 82. Your dealer
can reset the PIN for you.
Your phone is not "paired" to the HFL, or if your phone is "paired," it is in
use; press HFL BACK button.
Solution
, you are