Battery Installation - Fisher-Price LIGHTING MCQUEEN H8256 Owner's Manual & Assembly Instructions

H
IMPORTANT! Use only a Power Wheels
rechargeable battery. Use of any other battery will damage your
vehicle. Make sure that you charge the battery for at least 18
hours using the enclosed Power Wheels
operating your vehicle for the first time. Charge the battery for at
least 14 hours after each use of the vehicle. Never charge the
battery longer than 30 hours. Failure to follow these instructions
may damage your battery and will void your warranty.
Assembly Tool
1
• Insert the end of the assembly tool or a coin into the slot on the side
of the hood.
• Use the tool to lift the hood and access the battery compartment.
Power Wheels ®
12 Volt Battery
2 Battery Clamp
• Lift and pull the battery clamp forward.
• Plug the motor harness connector into the battery.
12

BATTERY INSTALLATION

® 12 volt lead-acid
® 12 volt charger before
Motor Harness Connector
3
• Place the battery in the battery compartment and release the
battery clamp. Make sure the battery clamp slides over the top of
the battery.
• Close the hood and fit the tabs on the hood into the slots in the
vehicle body.
• Press down to "snap" the hood in place.
H8256pr-0920