Page 1
Maximum weight: 19 kg. (42 lbs). For ages between 9 months and 3 years. Requires three “AA” batteries (included). Adult assembly is required. Tool required for battery replacement: Phillips screwdriver (not included). H8589 www.fisher-price.com/uk...
Parts Before Use CAUTION Please keep small parts such as plastic tabs out of children’s reach. Throw the plastic tab away. Note: A plastic tab is attached to the toy for in-store demonstration purposes. While the tab may have already been removed, check the dashboard to be sure.
Page 3
Front Wheels Bottom View • Place the base upside down on a flat surface. • “Snap” the front wheels to the underside of the base, as shown. Assembly • Fit the peg on the left side of the hood into the matching hole in the dashboard.
Battery Replacement Proper label application will help to keep the labels looking their best! • Wash your hands before applying the labels. • Make sure the areas where the labels will be applied are clean and dry. Wipe your vehicle with a clean, soft, dry cloth to remove any dust or oils.
Page 5
To change to Walker mode, follow these steps: Latch Bottom View • Turn the toy over. Press and slide the latch to an open position, as shown. Bottom View • Spread the seat halves until they “click” in place. Turn the toy over. It is now ready to be used as a walker.
Page 6
To change to Ride-On mode, follow these steps: PRESS • While pressing the button , close the seat halves. Turn the toy over. Latch Bottom View • Slide the latch to a closed position. It should “click” into place.Turn the toy over. It is now ready to be used as a ride-on.
• Slide the mode switch to either learning mode • Adjust volume to high or low • Low battery power may affect toy function, including irregular sound/lights and the toy may not turn off. Replace all batteries with alkaline batteries only. •...