Table of Contents
Advertisement
3. If you select [Select] in the previous step, the
figure shown on the right hand side will appear.
Select the image that you want to print with
the
/
buttons.
Select the [Print Num] (up to 99) with the
buttons.
After selecting the desired image and
printing number, press the SET button to
confirm.
4. Select [Exit] with the
the SET button.
5. Select [Print] with the
the SET button to start printing.
6. The printing starts and the figure shown on the
right hand side appears.
[COMPLETE] will be displayed temporarily,
reminding you that the printing procedure is
finished.
If an error is detected during the connection
(i.e. the printer hardware problem) between
camera and printer, [PRINT ERROR] will be
displayed.
If an error is detected during the communication (i.e. wrong setting on the
camera) between camera and printer, [ERROR] will be displayed.
The image printing may fail if the power to the camera is cut off.
We recommend that you use the AC power adapter when connecting the camera to the printer.
EN-40
/
buttons, and press
/
buttons, and press
Select
/
105-0003
Images
PictBridge
PRINTING
SET:Enter
SET:Enter
SET:Enter
Advertisement
Table of Contents
