Fisher-Price JEEP RUBICON H4433 Owner's Manual & Assembly Instructions page 12

F
Grab Bars Grab Bars
15
• Fit a grab bar onto each side of the vehicle, as shown.
16
• Insert a #10-32 x 1" screw through the hole in each grab bar
and into the seat. Tighten the screw.
12
ASSEMBLY
17
• Turn the vehicle on its side.
• Insert four #10 x ¾" screws in the holes (in front of and
behind each rear wheel) in the underside of each rear wheel
well, through the vehicle and into the ends of the grab bars.
Tighten the screws.
#10 x ¾" Screws #10 x ¾" Screws
BOTTOM VIEW
N1476pr-0920 N1476pr-0920