F
7
•
Fit the steering wheel cap into the center of the steering wheel.
•
Insert two #8 x 1" screws and tighten.
Steering
Column Cap
8
•
Turn the vehicle on its side.
•
Fit the steering column cap onto the end of the steering column.
•
Insert a #8 x 3/4" screw through the hole in the steering column
cap and steering column.
•
While holding the steering column cap in place, tighten the screw.
•
Turn the vehicle upright.
10
ASSEMBLY
Steering
Steering
Wheel Cap
Wheel Cap
Hood Latch
Slot
FRONT VIEW
9
•
Insert a hood latch into one of the slots near the hood on
the front of the vehicle.
•
Twist the base of the hood latch ¼ turn to secure it to
the vehicle.
•
Repeat this procedure to attach the other hood latch to
the vehicle.
Hood
Tabs
Tabs
Slots
Slots
10
•
Insert the tabs on the hood into the slots in the front end of
the vehicle.
•
Pull the hood forward and lower it closed.
•
Turn the hood latches ¼ turn to secure the hood.
Hood Latch
Hood Latch
N1476pr-0920
N1476pr-0920