How To Operate Your Vehicle - Barbie Volkswagen DUNE NEW BEETLE H0150 Owner's Manual & Assembly Instructions

L
IMPORTANT! As assembled, your vehicle is ready to roll in low speed (2
your child is ready to drive the vehicle in high speed (5 mph, maximum), follow the instructions
on this page to disconnect the high speed lock-out.
Beginner Use - Low Speed Drive
As assembled, your vehicle is ready to roll in low speed
(2 / mph, maximum). It has been pre-set so it will only
1
2
operate in low speed. After your child has mastered the
basic skills of driving and understands the rules for safe
driving, it's time to remove the high speed lock-out screw to
allow the vehicle to operate in low or high speed.
See the instructions on this page to remove the high
speed lock-out screw.
11
11
1
• Make sure the shifter is in the low speed
• Press down on the foot pedal
forward at a maximum of 2
practice steering to learn how far and how quickly to turn
the steering wheel when driving forward in low speed.
• Your vehicle has a patented electronic braking system
that automatically stops the vehicle when your child's foot
is lifted from the pedal.
• Make sure your child is comfortable with steering the
vehicle and automatically knows how to stop.

How to Operate Your Vehicle

11
2
11
11
. The vehicle goes
2
/ mph . Help your child
11 1
3
2
To Stop
11
3
Note: To avoid damaging the motors and gears, stop
the vehicle before shifting from forward to reverse
• Once your child is completely comfortable with operating
the vehicle in the forward mode, introduce reverse
• Make sure the shifter is in the reverse
• Press down on the foot pedal
reverse at a maximum of 2
designed to operate in low speed only in reverse.
• Help your child practice steering to learn how far and how
quickly to turn the steering wheel when driving in reverse.
position .
1
Advanced Use - High Speed Drive
Disconnecting the High Speed Lock-Out
Lock-Out Screw
• Before you disconnect the high speed lock-out, make
sure your child knows how to steer, how to start and
stop the vehicle and knows the rules for safe driving.
When the high speed lock-out is disconnected, the
vehicle can be driven forward in low speed (2
maximum) or high speed (5 mph, maximum).
• Make sure the shifter is in the reverse
• Loosen and remove the screw in the shifter box using a
Phillips screwdriver.
• Insert the lock-out screw into the hole in the shifter
handle to keep it for future use. It can be re-inserted
23
into the shifter box to lock-out high speed.
1
/
2
To Back Up
1
11
2
11
2
1 / mph
11
2
Shifter
mph, maximum). When
11
3
.
.
11
position .
1
.The vehicle will go in
. The vehicle is
3
Storage
Position
Lock-Out
Position
1 / mph,
2
position.