Charge The Batteries; To Check Battery Power And Recharge; Status Light Indications - Logitech Folio Getting Started Manual

Charge the batteries

The Keyboard Folio needs light to recharge. Six hours of typical room light a day
is recommended.

To check battery power and recharge

1. Place the iPad tray in the typing
position.
2. Press the Battery Check button.
If there is a red Status light or no light,
recharge the Keyboard Folio.

Status light indications

Light
Green
Red
Blinking green
One red blink,
then blinking green
No light
Description
The tray is in place, the Bluetooth connection is established,
and the battery is charged.
The tray is in place, the Bluetooth connection is established,
and battery power is low (10 - 20% charge). Recharge the Keyboard
Folio following the instructions above.
The tray is in place, the Keyboard Folio is attempting an iPad
connection, and the battery is charged.
The tray is in place, the Keyboard Folio is attempting an iPad
connection, and the battery charge is low.
The tray is not in place, the Bluetooth connection is lost,
or the battery is dead. See "Troubleshooting."
Logitech Solar Keyboard Folio
3. Close the Keyboard Folio with the solar
cells facing up. The Keyboard Folio
turns off.
4. Place the Keyboard Folio in a well-lit
room.
English 5