Controlling Volume - Linn Sondek CD12 Manual

Controlling volume

The volume control keys normally control the amplifier volume, irrespective of
which source you have selected.
Alternatively, you can program the Hi-Fi Personal Handset so that for particular
sources the volume control keys operate the TV volume.
For example, if you normally listen to the VCR through your TV rather than
through your amplifier, you can program the source used to learn VCR commands
so that the volume keys operate the TV volume when that source is selected.
To change the volume
Press the VOLUME +
To mute the volume
Press the MUTE
To change the balance
Press the BAL L
To associate the volume control keys with a new source
Press the source selection key for the source you want to change.
Within two seconds press the
Each time you do this the volume association of the source will be changed
between amplifier volume and TV volume.
For example, if you are using the
volume keys to control the TV volume when the VCR is selected:
Press TAPE 2, followed by
8
and - keys.
key.
or BAL R keys.
VOLUME +
TAPE 2 key to select your VCR, and you want the
VOLUME + and
and - keys together.
- keys together.