Table of Contents
Advertisement
9
• Insert the fork post up through the hole in the neck of the
frame. Make sure the fork is positioned so that the fork
covers face the rear wheels.
• Place the handlebar onto the fork post and push it down
onto the frame. Make sure the handlebar is positioned so
that the screw hole faces the rear wheels and aligns with
the screw hole in the fork post.
Hint: You may need to rotate the handlebar to align the holes.
• Insert the #8 x 3" screw through the hole in the handlebar
and into the fork post so that part of the screw (about
is still visible. Tighten the screw.
Cap
10
• Insert and "snap" the cap into the hole in the frame.
Handlebar
Fork Cover
Rear of Trike
Assembly
Basket Mount
Frame
Neck
Fork
Post
11
• Fit the basket mount onto the front of the handlebar.
• Insert four #6 x ½ " screws into the holes and tighten.
Basket
3
/
")
4
12
• Fit the basket on the tab on the front of the handlebar assembly.
• Insert two #8 x ¾ " screws into the top of the basket
and tighten.
Peg
Holes
13
• Position the seat upside down.
• Fit the small pegs on the seat retainer into the holes in
the seat.
5
Seat Retainer
Seat
Advertisement
Table of Contents
