Appendix: Additional Information; System Feature Codes - Samsung OFFICESERV DS-5014D User Manual

Appendix: Additional Information

System Feature Codes

ITP-5000D series phones have the following default feature codes. You can dial
these codes if there are no programmed buttons for the desired features.
Be aware that these codes can be changed in programming. If a code does not work as shown here,
check with your system administrator for the correct code(s).
Dial Code Feature
10+ext. no. Answer parked calls
11 Put calls on and take calls off
hold
12+ ext. no. Answer call on hold at another
station
13 Release door lock
16+spd no. Assign speed dial number
17 Dial stored number
19 Last Number Redial
2xx(x) Extension numbers
3xx(x) Extension numbers
400 Cancel DND
401 Set DND
41 Set Message (no ring)
42+ext. no. Cancel message
43 Set/Return message
44 Busy extension/line callback
45 Busy extension camp-on
46 Set up conference
47 Enter account code
48+msg no Set programmed station
message
Dial Code Feature
49 Send flash
5xx(x) Station groups
53+grp+0 Exclude group
53+grp+1 Include group
54+zone Meet Me Page
55+0 Page all internal zones
55+1 Page internal zone 1
55+2 Page internal zone 2
55+3 Page internal zone 3
55+4 Page internal zone 4
55+5 Page external zone 1
55+6 Page external zone 2
55+7 Page external zone 3
55+8 Page external zone 4
55+9 Page all external zones
55+* Page all zones
56 Answer Meet Me Page
57 Clear alarm sensor
58 Clear DISA Alarm
A-1