Sanyo Sprint KATANA User Manual page 36

Your phone notifies you of incoming calls in the
following ways:
The phone rings or vibrates.
The indicator light flashes.
The backlight illuminates.
The screen displays an incoming call message.
If the incoming call is from a number stored in your
Contacts, the entry's name is displayed. The caller's
phone number may also be displayed, if available.
When receiving a call, the following options are also
displayed by pressing
Call Guard to answer the call when you are in roaming
mode. (See "Using Call Guard" on page 62.)
or
Answer Answer:Speaker
to put the call on hold.
Answeron Hold
to answer the call by using a prerecorded
Screen Call
announcement. (See "Setting Up Screen Call" on
page 91.)
to mute the ringer (if available).
Quiet Ringer
Stop Vibration to turn vibration off when your ringer
setting is in vibrate mode.
to not answer the call and send a text
Ignore with Text
message to the caller.
22 Section 2A. Phone Basics
(right softkey).
Options
to answer the call.
Answering a Roam Call With Call Guard
Enabled
Call Guard is an option that helps you manage your
roaming charges when making or receiving calls while
outside the Sprint National Network. Please see
"Roaming" on page 60 for more information about
roaming.
To answer the call, press
proceed. (See "Using Call Guard" on page 62 for
additional information.)
Note When your phone is off, calls go directly to
voicemail.
Ending a Call
Close the phone or press
, and then press to
.