Advertisement

Quick Links

16. WARRANTY
Royal Sovereign International warrants the equipment sold is free from defects in
material and workmanship for a period of One (1) year for Parts and Labor from the date
of installation, excluding lamination rollers which are warranted for Six (6) months. This
warranty is extended only to the original purchaser. This warranty is the only warranty
made by Royal Sovereign International and cannot be modified or amended. Royal
Sovereign's sole and exclusive liability and the customer's sole and exclusive remedy
under this warranty shall be, at Royal Sovereign's option, to repair or replace any such
defective part or product. These remedies are only available if Royal Sovereign's
examination of the product discloses to Royal Sovereign's satisfaction that such defects
actually exist and were not caused by misuse, neglect, attempt to repair, unauthorized
alternation or modification, incorrect line voltage, fire, accident, flood or other hazard.
All warranty claims must be filed through the authorized Royal Sovereign dealer or
reseller through which the equipment was originally purchased. Model, serial number
and date of delivery are required for all claims.
The warranty made herein is in lieu of all other warranties, expressed or implied,
including any warranty or merchantability or fitness for a particular purpose. Royal
Sovereign will not be liable for personal damage or personal injury (unless primarily
caused by its negligence), loss of profit, or other incidental or consequential damages
arising out of the use or inability to use this equipment.
LIMITED WARRANTY
This warranty specifically does not cover damage to laminating rollers caused by knives,
razor blades, or any sharp objects or abrasives, or failure caused by adhesives, or
damage caused by lifting, tilting or improper use of the machine. Warranty repair or
replacement by Royal Sovereign or its authorized Reseller(s) does not extend the
warranty beyond the initial one year period from the date of installation. Unauthorized
customer alterations will void this warranty.
CORPORATE HEADQUARTERS
Royal Sovereign International Inc.
2 Volvo Drive, Rockleigh, NJ 07647 U.S.A.
TEL : +1 ) 800-397-1025
E-mail : info@royalsovereign.com
RS Holland B.V.
Planetenweg 75 2132HM Hoofddorp, The Netherlands.
TEL : +31) 23-5626620, +31) 23-5654451
FAX : +31) 23-5654565
E-mail : purchaseorder@royalsovereign.com
RS Canada Inc.
164 Oakdale Road, Toronto, Ontario M3N 2S5
CANADA
TEL : +1
416-741-8400
FAX : +1
416-741-8185
)
)
E-mail : info@royalsovereign.com
FAX : +1 ) 201-750-1022
Royal Sovereign Inc.
<Oversea Sales Office>
1001, World Meridian II, 426-5, Gasan-dong,
Geumcheon-gu, Seoul, 153-759, KOREA
TEL : +82)2-2025-8800
FAX : +82)2-2025-8830
E-mail : sales@royalsovereign.com
RS International Australia PTY. LTD.
30 Prime Drive, Seven Hills, NSW 2147, Australia
TEL : +61) 2-9674-2127
FAX : +61) 2-9674-2027
E-mail : salesaust@royalsovereign.com
19
OWNER'S MANUAL
RSC-1400L Laminators
Read all instructions carefully before use.
For any Customer Support needs please choose the
Customer Support tab
on www.royalsovereign.com
Royal Sovereign International Inc.
www.royalsovereign.com

Advertisement

Table of Contents
loading

Summary of Contents for Royal Sovereign RSC-1400L

  • Page 1 Royal Sovereign International and cannot be modified or amended. Royal Sovereign’s sole and exclusive liability and the customer’s sole and exclusive remedy under this warranty shall be, at Royal Sovereign’s option, to repair or replace any such defective part or product. These remedies are only available if Royal Sovereign’s OWNER'S MANUAL examination of the product discloses to Royal Sovereign’s satisfaction that such defects...
  • Page 2: Table Of Contents

    1. INTRODUCTION TOPIC PAGE Thank you for choosing a Royal Sovereign laminator. It has been designed and manufactured to provide years of continuous service. For complete operating and 1. Introduction......................2 maintenance information please read this manual thoroughly. Upon receipt of your 2.
  • Page 3: Installation

    (“OFF” position) when moving to a different location. L-wrench (2.5) ELECTRICAL REQUIREMENTS Dust Cover Royal Sovereign recommends that a licensed electrician ensuresproper power installation Spare Motor Fuse - FUSE(50T) to your laminator in accordance with electrical codes in your area. (6.3A) The laminator should have a dedicated power line.
  • Page 4: Product Identification

    ? J 5 ? f ? W . Y ? f ? ? f ? ? ' 6 K ? O . Y g ? ? V 4 0 Y ? g ? RSC-1400L PART NAME RSC-1400L SAFETY COVER Control Buttons EMERGENCY SWITCH FRAME-PAPER GUIDE 1.
  • Page 5: Roller Nip Settings

    RSC-1400L 7. ROLLER NIP SETTING 8. USING FOOT PEDAL AND REMOTE CONTROL It is important to adjust the roller nip settings to the appropriate thickness of the board USING FOOT PEDAL being used. Use the guide below to adjust to the correct position.
  • Page 6: Using Cross Cutter

    RSC-1400L 9. USING CROSS CUTTER 10. LOADING FILM Royal Sovereign films are wound with the adhesive side facing the inside of the roll The cross cutter is located in the rear exit table of the machine. (adhesive in). Loading films to upper and lower film shafts: (See page 5 for assistance with parts identification.)
  • Page 7: Threading Film

    RSC-1400L 11. THREADING FILM 8. Cut and separate the release liner and the film.(Figure Figure 3 9. Thread the craft paper behind the Lower Idle Bar to the top film that is resting on the main roller (do not use the Lower Idle Bar for Mounting). (Figure 4) 11.1.
  • Page 8: Mounting

    RSC-1400L 16. Press the Stop button when the leader board has completely exited from the rollers. 4. Flip the image over the top roller and hold on to the release liner (Figure 4). 17. Use the Cross Cutter to cut the leader board from the web (see page 9).
  • Page 9 RSC-1400L 12. INSTALLATION OF FRONT FEEDER and REAR 4. Disassemble the power switch bracket and place the left REWINDER OPTIONS rewinder outside of the frame; fasten with round head 3/16"(M5) screws (included in the option kit). Then, Note: Below options are to be installed by an authorized RS reseller.
  • Page 10: Maintenance

    1.To clean the machine body, dampen a cloth with water only and gently wipe the machine clean. Removing Adhesive Build Up Description RSC-1400L 1. Remove the film from the laminator. Power supply AC 100, 200, 220~240V 50/60Hz 120V 60Hz Power consumption 100W 2.

Table of Contents