Additional Cautions; Cautions For Setting The Detection Function; Cautions For Changing The Encoding Setting; Checking The Software Version - JVC VN-H37U series Operation Manual

Additional Cautions

Cautions for setting the detection function

You cannot set motion detection, audio detection, and tampering detection at the same time.
An error message is displayed when one detection function setting is already enabled and you try to select
another. Check the content of the error message, set the already-enabled detection function to "OFF", and
then reconfigure the detection function. (
"Audio Detection Page", "Tampering Detection Pages")

Cautions for changing the encoding setting

When changing an already-configured encoding setting on the Basic Settings 2 page, Encoding page, or SD
recording page, PTZ and the auto patrol settings are cancelled.
In this case, set PTZ and the auto patrol settings again after setting the encoding setting. ( "Instructions
(Setting)" ─ "Operations" ─ "PTZ Page", "Auto Patrol Page")

Checking the software version

Check on the following screen that the software version is "1.4.30".
Click [Advanced Settings] and [Miscellaneous]
"Instructions (Setting)" ─ "Operations" ─ "Motion Detection Page",
19
Check that this is
"1.4.30".