Fisher-Price MX3 73535 Owner's Manual & Assembly Instructions page 12

5
• Turn the mini-bike on its side.
• Loosen and remove the screws in the brake
compartment cover.
6
• Turn the mini-bike over and remove the other two screws
in the brake compartment cover.
• Remove the brake compartment cover and locate brake
cable, lock nut and adjustable knob.
Adjusting the Brakes
Loosen
and
Remove
Brake Compartment Cover
Brake Compartment
Lock Nut
• Turn the lock nut counter-clockwise a few turns to
loosen it.
• Turn the brake adjustment knob counter-clockwise a few
turns to close the gap.
• Again, examine the brake handle to be sure there is
no gap between the brake base and the brake handle.
Re-tighten the brake adjustment knob if still needed.
• After you are satisfied that you have properly closed the
gap between the brake base and the break handle, hold
the brake adjustment knob in position and turn the lock
nut clockwise until it stops against the metal bracket.
• Replace the brake compartment cover and the four
screws. Tighten all four screws with a Phillips
screwdriver. Do not over-tighten.
Hint: The location of the brake handle is adjustable for your
child's comfort. To adjust, loosen the screw on the back of
the brake handle with the Allen wrench provided. Slide or
rotate the handle to the desired location and re-tighten the
screw with the Allen wrench.
12
Brake
Lock Nut
Adjustment
Metal Bracket
Knob