JUKI LBH-1790 Instruction Manual page 48

No.
Knife solenoid lifting time setting
K3
Knife cylinder lowering time (Optional)
K4
Y-feed motor origin compensation
K5
Needle-rocking motor origin compensation
K6
Presser lifter motor origin compensation
K7
Pattern selection function under sewing mode
K8
Ineffective/effective
Ineffective
Thread trimming on the way in continuous stitching
K9
Permitted/Prohibited
Permitted
Cloth cutting knife return power
K20
Ths tem sets output power at the tme of returnng
the cloth cuttng knfe.
Release amount of bobbin thread trimmer
K2
at the start of sewing
Ths tem sets the amount of releasng the bobbn
thread trmmer at the statrt of sewng.
Presser lifter speed
K22
Ths tem sets presser lfter speed.
Needle thread trimming adjustment mode
K5
start
Needle thread trmmng adjustment moton starts
wth READY key ON.
Bobbin thread trimming adjustment mode
K52
start
Bobbn thread trmmng adjustment moton starts
wth READY key ON.
Sensor check mode start
K53
Sensor check starts wth READY key ON.
Item
Effective
Prohibited
– 46 –
Settng range Edt unt
5 to 00 5ms
5 to 300 5ms
-20 to 400  pulse
(0.025mm)
-0 to 0  pulse
(0.05mm)
-00 to 0  pulse
(0.05mm)
– –
– –
0 to 3 
0 to 5  pulse
 to 3 –
– –
– –
– –
Intal value
5
50
0
0
0
Ineffectve
Permtted
0
8
2
–
–
–