Advertisement
5
• Fit the cap nut on the end of the straight axle.
• Tap the cap nut with a hammer. Gently pull the rear
wheel to be sure the cap nut is securely attached
to the straight axle.
Hint: You may need the help of another adult to hold
the other end of the straight axle in place.
6
• Fit the tabs on the wheel cap into the slots in the
wheel hub. Push to "snap" the wheel cap in place.
• Repeat this procedure to attach the other wheel cap to
the other wheel hub.
PRINTED IN MEXICO
Assembly
• Fit two pedal hubs onto the pedal axle tabs. Make sure
• While holding the pedal hubs
• Press the pedal hubs into the center of the front wheel
Wheel Hub
Wheel Cap
• Turn the front wheel
• Insert the remaining pedal
• Press the pedal hubs until they are flush with the
4
Pedal Hub
Pedal Hub
7
the tabs fit into the slot in each pedal hub.
8
on the pedal axle, insert the
pedal axle into the hole in the
center of the front wheel.
until they are flush with the surface of the front wheel.
9
assembly over.
hubs on top of and below the pedal axle and into the
hole in the center of the front wheel.
surface of the front wheel.
Pedal Axle Tab
Pedal Axle Tab
Front Wheel Hole
B8776pr-0920
Advertisement
