Advertisement
PROBLEMS AND SOLUTIONS
Problem
No status light
Flashing red
status light
Solid red
status light
7
Possible Cause
No power
to charger
Loose connections
Bad charger
Wrong batteries
Loose connections
Undercharged
batteries
Batteries dead
Undercharged
batteries
Solution
Make sure power flow to the wall outlet
is "ON".
Check connections of all plugs. Make
sure the battery connectors are tightly
plugged into the charger connectors
and the power cord connector is tightly
plugged into both the charger and the
wall outlet.
There is no sure way to tell if your
charger is working unless you have a
volt meter. If you suspect there is a
problem with your charger, contact
®
Power Wheels
Consumer Relations.
This charger is intended for use only
with a Power Wheels
with two 6-volt lead acid batteries.
Check connections of all plugs. Make
sure the battery connectors are tightly
plugged into the charger connectors
and the power cord connector is tightly
plugged into both the charger and the
wall outlet.
Batteries need a 100% (solid green)
charge every other use.
Replace the batteries with a new,
®
Power Wheels
12-volt system with
two 6-volt lead acid batteries.
Charge batteries 100% (solid green) or
Ready for Use (flashing green).
®
12-volt system
Advertisement
