Advertisement
PROBLEMS AND SOLUTIONS
Problem
No indicator light
Flashing red
indicator light
Possible Cause
No power
to charger
Loose connections
Bad charger
Wrong batteries
Loose connections
Undercharged
batteries
Batteries dead
Solution
Make sure power flow to the wall outlet
is "ON".
Check connections of all plugs. Make
sure the battery connectors are tightly
plugged into the charger connectors and
the power cord connector is tightly
plugged into both the charger and the
wall outlet.
There is no sure way to tell if your
charger is working unless you have a
volt meter. If you suspect there is a
problem with your charger, contact
Power Wheels
®
Consumer Relations.
This charger is intended for use only
with a Power Wheels
with two 6-volt batteries.
Check connection of all plugs. Make sure
the battery connectors are tightly
plugged into the charger connectors and
the power cord connector is tightly
plugged into both the charger and the
wall outlet.
Batteries need a full (100%) charge
(6-8 hours) every other use.
Replace the batteries with a new,
Power Wheels
®
12-volt system with two
6-volt batteries.
12-volt system
®
7
Advertisement
