Advertisement
Wireless LAN Function Settings
You can view or edit the wireless settings.
Basic Operation
1.
While holding down the [Key Touch] button, press the
[Transpose] button.
2.
Press the [
] [
] (Slow/Fast) buttons to select the
"Wireless," then press the [Song] button.
3.
Press the [
] [
] (Slow/Fast) buttons to select menu,
then press the [Song] button.
Menu
Explanation
Status
This shows the wireless LAN status.
Connect
Connect to a wireless LAN access point.
Option
Make settings for Wireless ID or Ad-Hoc mode (p. 3).
In the explanations that follow, procedures will be indicated
using arrows, like this: "Wireless" g "Status."
Status Indication
This shows the wireless LAN status.
1.
Select "Wireless" g "Status."
The status screen will appear.
Display
Explanation
Currently connected to the wireless LAN access point.
Signal level:
Strong
Three bars are used to indicate the signal level (the
Signal level:
strength of the connected wireless LAN access point's
Middle
radio signal).
The identifier (name) of the connected wireless LAN
Signal level:
Weak
access point is shown.
The wireless USB adapter is inserted, but not
Not Con
connected to a wireless LAN access point.
NotAvail
The wireless USB adapter is not inserted.
Ad-Hoc mode (p. 3).
DP90S/90
The Ad-Hoc SSID is shown. Press the [
SSID
to display the Ad-Hoc key.
For details, refer to "Connecting in Ad-Hoc mode" (p. 3).
2.
Press the [
] (Fast) button to display the IP address.
Connecting to a Wireless LAN Access Point
That You Select (Select AP)
This method lets you connect by choosing a wireless LAN access
point from the list that is displayed.
* Wireless standards 802.11g/n (2.4 GHz) and authentication
methods WPA/WPA2 are supported.
1.
Select "Wireless" g"Connect" g "Select AP," then press the
[Song] button.
The Select Access Point screen will appear.
• An "*" symbol is shown for the currently-connected wireless LAN
access point.
2.
Press the [–] [+] button to choose the wireless LAN access
point to which you want to connect, and press the [Song]
button.
• You will be connected to the selected wireless LAN access point.
• If you're using this wireless LAN access point for the first time,
you'll proceed to the authorization (PASS) screen.
• If this is a wireless LAN access point to which you have connected
in the past, just press the [Song] button and you'll be connected.
Once successfully connected, "Success" will appear.
Authorization screen (PASS)
3.
Enter the security code (passphrase) of your wireless LAN
access point, and press the [Song] button.
How to enter characters
Use the [ ] [ ] (Slow/Fast) buttons to select the position at
which you want to specify a character. Use the [–] [+] buttons to
change the character.
* You cannot enter a space at the end of the passphrase.
Once successfully connected, "Success" will appear.
* If you fail to connect, refer to "Troubleshooting" (p. 4).
4.
Press the [Key Touch] or [Transpose] button to exit
] (Fast) button
Function mode.
2
About the Wireless LAN Function
Advertisement
