Vacation Hold - Robertshaw 8601 User Manual

Begin Programmed Operation
1. Make sure the cursor is above RUN/SET PROG.
2. Place
3. Place HEAT-OFF-COOL switch into COOL or HEAT depending on
the season.
heat off cool auto on
MON
° F
run/set temp vac set
prog hold hold clock
select
Temporary Program Hold
You can temporarily increase or decrease the temperature and hold it for
3 hours or until the next program event, whichever comes first.
1. Press the
or button, adjust the temperature to the desired level.
2. Press SET.
Another way to select a temporary hold is:
1. Press SELECT until the cursor is over TEMP HOLD. Press SET.
The temperature will be blinking. Use the
the temperature.
2. Press SET.
To cancel a temporary hold, press SELECT until the cursor is above
RUN/SET PROG. Press SET.

Vacation Hold

You can set your thermostat to hold a desired temperature for 1-365 days.
Vacation hold terminates at midnight of the last day. The thermostat
returns to normal operation the next day at 12:01 AM.
1. Press SELECT until the cursor is over VAC HOLD. Press SET. The
temperature will be blinking. Use the
temperature.
2. Press SET. 7d will be displayed. Use the
between 1 and 365 days.
3. Press SET.
To cancel a vacation hold, press SELECT until the cursor is above
RUN/SET PROG. Press SET.
AUTO–ON switch into AUTO.
set
or button. The temperature will blink. Using the
heat off cool
9
auto on
run/set temp
hold
prog
select
or button to change
or button to change the
or button to adjust
vac s
hold clo