Set Of The Button Neck Wrapping; Set Of The Sewing Flat Button With Blindstitch - JUKI AMB-289/IP-420 Instruction Manual

(5) Set of the button neck wrapping

1
Groove
A
Groove B
Groove A
4

(6) Set of the sewing flat button with blindstitch

When performing the button neck wrapping
2
process of stay (counter) button, use the button
neck wrapping attachment (accessories) 1 .
Groove
Loosen screws 2 and move holder plate 3 to
B
and fro to perform the adjustment of the height of
button neck wrapping attachment.
3
Height of
button neck
wrapping
[Setting procedure of the button neck wrapping
attachment]
Insert convex 4 of the attachment to concave 5
of the feed plate at the time of the button neck
wrapping process pattern.
5
When performing the sewing flat button with
blindstitch, insert underplate spacer A 1 supplied
2
as accessories (Part No. : 40020764) to the pin
position. In addition, fix it with screws 2 when
1
using it always.
Select and use a proper underplate spacer from
among the underplate spacers below according to
the thickness of cloth.
Ⅰ–17
Confirm that button neck wrapping
positioning grooves A and B are
straight front and rear.
Discription Thickness
UNDER_PLATE_
t=1.6
SPACER A
UNDER_PLATE_
t=2.0
SPACER B
UNDER_PLATE_
t=2.6
SPACER C
Part No. Remarks
40020764 Accessory
40020769 Optional
40020770 Optional