HP BladeSystem c7000 Setup And Installation Manual page 50

Connection
Mezzanine slot 2—1x or
2x cards
Mezzanine slot 2—4x
cards
* Connectivity to interconnect bays 7 and 8 is only available with four-port mezzanine cards or port 2 of 4x card in
Mezzanine slot 2.
Mapping full-height blades
The following table lists the available configurations for full-height devices installed in device bay N (1–8).
Port number Connects to interconnect
bay/port
1x/2x port 1 5 / port N
1x/2x port 2 6 / port N
1x/2x port 3 7 / port N
1x/2x port 4 8 / port N
4x port 1 5/Port N
4x port 2 7/Port N
Comments
One or two single-wide
interconnect modules
One or two double-wide
interconnect modules
Installation 50