Table of Contents
Advertisement
Error Number
0023
0024
0025
0026
0027
0028
0029
0030
0031
0032
0033
0034
0035
0036
0038
0039
0040
0041
0042
0043
0044
0045
0046
0047
0048
0049
0050
0051
0052
0053
0054
0055
0056
0057
0058
386
File-System Errors
File-System Error Text
The disk address is out of bounds, or the maximum number of blocks in an alternate-key file is
exceeded.
Privileged mode is required for this operation.
AWAITIO[X] or CANCEL attempted on file opened for waited I/O.
AWAITIO[X] or CANCEL or CONTROL 22 attempted on a file with no outstanding I/O requests.
An operation was attempted with outstanding no-waited I/O requests pending.
The number of outstanding non-blocking operations would exceed that specified; an attempt was
made to open a disk file or receiving file with the maximum number of concurrent operations
more than 1; an attempt to ADD more than the configured maximum number of sub devices for
an I/O process; or sync depth exceeds number the opener can handle; or trying to run more than
254 processes from the same program file.
A required parameter is missing in a procedure call, or two mutually exclusive parameters were
supplied.
Message system is unable to obtain memory because either no entry is available in the message
block pool or the maximum number of RECEIVE or SEND message blocks are already in use.
Unable to obtain file-system buffer space.
Unable to obtain storage pool space.
I/O process is unable to obtain sufficient buffer space.
Unable to obtain a file-system control block.
Unable to obtain a lock control block, or the transaction or open lock unit limit has been reached.
Unable to lock physical memory; not enough memory available.
Attempt to perform operation on wrong type of system.
The server process received a request with a sync ID older than the set of saved replies.
The operation timed out. A command did not complete within the time specified by its
time-limit parameter.
A checksum error occurred on a file synchronization block.
Attempt to read from unallocated extent.
Unable to obtain disk space for file extent.
The disk directory or device control table is full.
The file is full; or two entries for process-name were already in the process pair directory.
An invalid key was specified; key length passed to CREATE exceeds 255 bytes; or application
failed to open an alternate-key file.
The alternate key data is not consistent with primary file data.
Security violation; illegal operation attempted.
Access violation; attempt to use an unexpired labeled tape for output; or a mismatch between a
DEFINE Use attribute (input or output/extend) and the current operation (read or write).
Directory error on a disk.
Directory on a disk is marked bad.
Error in the disk free space table.
File system internal error.
I/O error in disk free space table or in Data Access Manager undo area.
I/O error in disk directory; the file is no longer accessible.
I/O error on disk label; the disk is no longer accessible.
The disk free space table is full.
The disk free space table is marked bad.
Advertisement
Table of Contents
