Sanyo LCD-32XR10SA Instruction Manual page 11

Connecting Headphones
TV Side
Headphones
Connecting a USB device
To USB port
TV Side
Connecting an HDMI device
TV REAR
HDMI cable
Connections
To connect headphones:
Insert the plug of the headphone into the TV's Headphone jack.
When using headphones, adjust the headphone volume so as to avoid
excessive levels, as hearing damage may result.
Insert your USB device into the USB port.
To play from the USB device:
1. Turn on your TV, then press INPUT button. The Input menu opens.
2. Press 5
Note: You can also press USB button on the remote control for USB.
Never remove the USB device or turn off the TV while using the USB
device.
How to connect an HDMI device:
Connect the HDMI cable between the HDMI jack on the TV and
HDMI output jack on the device.
Note: If your device has an HDMI connection, we recommend you
use that to get the best quality possible.
HDMI device
Note:
If the external device has DVI output only, use a DVI to HDMI
adapter cable to connect to the HDMI terminal. Connect the audio
cable to the PC IN AUDIO jack on the TV rear.
(Continued)
or6 to select USB, then press ENTER to confirm.
To play from the HDMI device:
1. Turn on your TV, then press INPUT button. The
Input menu opens.
2. Press 5
or6 to select HDMI1(or HDMI2 if HDMI 2
jack is used), then press ENTER to confirm.
Note: You can also press HDMI button once or twice
for HDMI1/HDMI2.
3. Turn on the HDMI device and set it to the correct
mode. Refer to the instructions that came with the
HDMI device.
9