Sound Menu - Haier LET22T1000F User Manual

DTV Manual Tuning
_
VHF CH
Press OK to search
Bad Nomal
3). ATV Manual tuning :
You can change the sound system to search
the analog TV channels and fine tune the
channels , then storage the channels you
selected.
ATV Manual Tuning
_
Storage To 1
System BG
Current CH 1
Search
Fine-Tune
Frequency 255.25 MHz
Save
NOTE:
Press teletext red button to storage to channels
after manual tuning .
4). Program edit:
You can Delete ,Rename ,Move, Skip , FAV any
programs.
Delete
Press teletext red button , the program in cursor
will delete.
Rename:
Only can rename ATV programs .
Move the cursor to the program, press teletext
green button to rename the program.
Press to choose the character. Press
move the cursor .
Press MENU button to exit edit , Press EXIT to
exit the menu.
Note: ATV programs name only can be 5
DTV programs name can be 25
Use the Arrow Buttons to select the channel you
wish to move. Then press the Yellow Button to
select Move function. Once active, enter the
number button and then press OK to confirm.
Press to choose the program , press teletext
blue button to skip this program, The
show on the right side of the program .
Choose the skipped program, press blue button
again , you can cancel the skip ,The
disappear .
+
5
Good
+
MENU
to
characters long
characters long.
will
will
Favourite
Press to choose the program , press FAV
button , it will show
program.Choose the FAV program , press
FAV button again , you can cancel the FAV,
the will disappear .
Once your favorite group is created, you can
press the FAV key to quickly access your favorite
channel.
5). CI information: (optional)
This menu can display the CI card' s information.
2. PICTURE MENU
The second item of the MENU is PICTURE MENU.
You can adjust picture effect here, such as
contrast, brightness, etc.
Press OK to move, press OK to adjust.
<
PICTURE
Picture Mode Standard
Contrast 82
Brightness 50
Color 50
Sharpness 50
Tint 50
MENU
NOTE:
1).There are four picture modes can be
selected standard,mild,user,Eco
(energy-saving mode).
2).Tint is available in NTSC system only.
3).There are four colors temperature modes
can be selected medium, warm, cool,user
4).Screen is available in PC mode only which,
can adjust Horizontal position, vertical
position, size and phase.

3.SOUND MENU

The third item of the MENU is the SOUND
,
MENU.
You can adjust the sound effect here such as
treble, bass, balance etc.
Press to move, press OK to adjust.
<
SOUND
Note:
Auto volume: only available when the input
signal volume is too large or distortion.
on the right side of the
Picture Mode Standard
Color Temperature
Aspect Ratio
Noise Reduction
>
Screen
Color Temperature Medium
Red 40
Green 31
Blue 50
MENU
Sound Mode Standard
Balance
Auto Volume
Surround Sound
>
S/PDIF Mode
P.16