Using External Usb Disk For Recording; Time Shift; Recording - Haier LET32T1000HF Instruction Manual

Using the features
Press the button on the remote control to select the
adjusted item.
1 2
3
4
Press EXIT button to return to the previous menu.
Using External USB
Disk For Recording
Note
The system will format the whole device and if your
device size is bigger than 1GB, you can set the size
which is used for time shift.
If you select all the size format for time shift, you
can not do any recording.
Only have to format when you use the device for
record for the first time.
Suggest the minimum device size for record is 1GB.
Bit rate:
Device bit-rate>5MB/s REC is safe .
The system can not work normally if the USB
device have the listing problem below:
The device has bug.
The device has error block.
-00:00:08 14:30
/X
The device reports the unfaithful size.
IMPORTANT
USB device should be format as FAT32 format by
your PC before insert to the USB connector.

Time Shift

EN-25 Digital LED LCD Television Instruction Manual
1. Play or pause
2 Stop
3. Play previous text
4. Play next text
15:00
Insert the USB device with FAT32 format into the
USB connector.
Press PLAY/PAUSE button to start timeshifting .
Time Shift function is only available in DTV mode. Press
PLAY/PAUSE to pause the program, and press PLAY/
PAUSE again, the time shift program will be played. If
you want to stop time shift function, press the STOP
button.
You can stop the time shift program being played by
pressing the STOP button.

Recording

Press RECORD button to record the program being
played, and press EXIT
interface minimum.
[00:00:00/01:30]
5 five The streets of SAN Francisco (384MB)
Press STOP button to stop the program recording
being played.
For Playback the recorded program. Enter USB to
Select the content you recorded.
Press OK button to play the program recorded and
press STOP button to stop it.
button to make the recording
RECORD
14:52:52