Preparations For Operation - Haier HYC-68 Operation Manual

Preparations for operation

Remove all package assembly.
Including foam pedestal and adhesive tape which is used to fix accessories.
Check off attached accessories and data.
Check the materials including in the box against the packing list. If there is any
discrepancy, please consult the store where you purchased the refrigerator.
Place the refrigerator on a suitable position.
Please refer to the above-mentioned "Place environment".
Clean the refrigerator before operation.
For more information, please refer to the "cleaning" section.
Standstill.
After placing the refrigerator flat and completing the cleaning, do not electrify the
refrigerator, until after 30minutes of standstill so as to ensure smooth operation of the
appliance.
To facilitate the inquiry, please copy the refrigerator model and factory
number onto the warranty.
ATTENTION